vacorex⁶ VX
Extraction pump for the polymer industry
MAAG introduces the vacorex®-x⁶ class gear pump. vacorex⁶ fulfills ideally modern polymer production processes which require pumps that can discharge at high pressure despite very low fill level and high vacuum conditions in the reactor/devolatilization vessel.
MAAG vacorex⁶ process a wide range of different polymer grades without affecting their quality. Reliable, requiring little maintenance, and robust enough to withstand the rigors of years of operation is vacorex⁶ gear pump the ideal solution for such applications.
Advantages
- + up to 40 % more throughput or + 28 % more pressure and + 11 % more throughput compared to the classic pumps with the same pump size
- + 30 % better heat transfer in the bearings
- + 15 % larger inlet with optimized geometry
- + 8 % better vol. efficiency
- - 10 % less energy consumption
une gamme de fluides de pompage typiques
PET / PBT
Polyamide, Polycarbonate
Cellulose acetate, Polyacrylicnitrile
Silicone / Oil additives
SBR Latex / Epoxy resin
Phenolic resin, Polymethylmethacrylate
Polystyrene (incl. ABS, EPS)
Polysulphone
Elastomers / Polyolefine
And others
Paints and varnishes
Waxes and paraffins
Mineral oils and fats
Fuels
Petrochemical products
Lube oil
Polyamide, Polycarbonate
Cellulose acetate, Polyacrylicnitrile
Silicone / Oil additives
SBR Latex / Epoxy resin
Phenolic resin, Polymethylmethacrylate
Polystyrene (incl. ABS, EPS)
Polysulphone
Elastomers / Polyolefine
And others
Paints and varnishes
Waxes and paraffins
Mineral oils and fats
Fuels
Petrochemical products
Lube oil
Technical Data
Pression différentielle en bar
– 320
Viscosité en Pas
max. 20.000
Températures en °C
max. 350
Logement
Alloy-/Carbon Steel -other material on request
Arbres de transmission
Nitrided steel / tool steel
Joints d'arbre
* Standard: vispac® with standard barrier system and adjustable throttle screw* Options: viscoseal, vislip®, vispaclip, double mechanical seal with barrier system
Chauffage de la pompe
Thermal oil or steam; design condition 25 bar / 350°C
Installation
For vertical, direct installation to vessel
